Autonomous fire detector with integrated battery and buzzer approved French Standard
Optical smoke detector operating according to TYNDALL effect, equipped with the technology dedétection photocell detects the presence of smoke in the house. Certified products NF EN 14604 (December 2011), CE and NF-DAAF and comply with the European Directive 2002/95 / EC.
Certification: Certificate CE-EN 14604 No. 0333-CPD-292002, Certificate NF-DAAF VESTA -5 No. 001-5 / B.
Operation: the smoke detector activates the built-in siren and the lighting of a red LED (LED Flash) from the collection of raw smoke particles. It will automatically reset and siren pauses when no particle is in the optical chamber.
Sensor: electronic photo.
Sensitivity: Meets the NF-EN14604 standard.
Absent indication of battery: anti-lock device without battery.
Power and battery life: 9 volt alkaline battery autonomy 5 years (VESTA 5).
Alarm: integrated piezo siren.
Automatic self-test: testing its sensor, the electronics and battery voltage.
Operating temperature: 0 ° to 55 ° C.
Beep:> 85 dB (A) at 3 m and> 94.5 dB (A) at 1 m.
Signalling dead battery low battery buzzer by issuing a beep every minute for 30 days.
- Red light signal once a minute.
- Button test to ensure proper operation of the unit once a month or after each battery change (full room and alarm test).
Equipment: insect grille to avoid nuisance tripping.
Humidity: 0-93% RH.
Dimensions (Ø x H): 120 x 50 mm.
Weight: 185 g.
The ceiling in the center of the room or over 20 cm of obstacles (walls, partitions, beams etc.) or more than 60 cm from any corner of the room, with 2 mounting screws (provided).
Installation certificate: supplied with each instrument for insurance.